Djibouti Diesel Fuel-System Order Case: Separating Injector and Pump References With a Special Packaging Requirement
Three References in One Djibouti-Market Order
A proforma invoice associated with Djibouti lists three diesel fuel-system product lines.
The order includes four units of injector 0445110588, one pump under reference 304-0677 and 12 units of injector 127-8216.
The associated preparation notes also specify a yellow protective bag for the 127-8216 product line.
This is a mixed-component order in which product type, quantity and packaging instructions must remain connected to the correct reference.
Product-Line Breakdown
| Product reference | Description in the record | Quantity |
| 0445110588 | Injector | 4 PCS |
| 304-0677 | Pump | 1 PC |
| 127-8216 | Injector | 12 PCS |
The total quantity is 17 units, but that total consists of two injector lines and one pump line.
A general count cannot confirm that the correct mix has been prepared.
The Packaging Instruction Applies to One Reference
The handling note specifically associates a yellow protective bag with 127-8216.
It does not state that the same packaging requirement applies to the other injector reference or the pump.
That distinction is important when several product types are included in one order. A packaging instruction should remain attached to the line for which it was recorded.
The source establishes the requested preparation method but does not include a completed packaging-inspection certificate.
Djibouti Market and Shipping Status
The commercial document identifies a Djibouti-linked purchasing arrangement and includes proposed payment and freight terms.
These terms are not, on their own, evidence of final dispatch or overseas receipt.
The available materials also do not identify the engine applications of all three components or show that they were installed together.
Case Summary
This case highlights the handling of a mixed injector-and-pump requirement for the Djibouti market.
Its distinguishing feature is the combination of three separate product quantities and a packaging instruction that applies specifically to injector 127-8216.
